Your shopping cart is empty!
Electronic Engine Speed Controller Governor ESD5111 Generator Genset Parts
Product Code: 6957435
Availability: In Stock
Availability: In Stock
$86.41
Ex Tax: $86.41
Ex Tax: $86.41
Product Description
Description:
ESD5111 Electronic Engine Speed Controller Governor
Specification:
Model: ESD5111
Size: 14.5 x 14.1 x 2.4cm
Features:
- At present,it is very rich, perfect models in the new generators are widely in use.
- ESD5111 built on the basis of the start of the new fuel control and smooth slow start to control the process, these new features can be resolved in the engine to start the process by the rapid filling of black smoke caused by the phenomenon has greatly improved the engine's life .
Introduction:
The ESD5111 series speed control unit is an all electronic device designed to control engine speed with fast and precise response transient load changes.
| Specification | |
Isochronous Operation/Steady State Stability | ± 0.25% or better |
Speed Range/Governor | 1K-7.5K Hz continuous |
Speed Drift with Temperature | ± 1% Maximun |
IDLE Adjustment | 160 ± 20Hz ~ 60% of set speed |
Droop adjustment Min.(K-L Jumpered) | 15Hz. ± 6Hz. per 1.0 A change |
Droop adjustment Max.(K-L Jumpered) | 400Hz. ± 75Hz. per 1.0 A change |
Droop Adj. Max. (K-L Jumpered) | 875Hz., ± 75Hz. per 1.0 A change |
Droop Adj. Min. (K-L Jumpered) | 15Hz., ± 6Hz. per 1.0 A change |
Speed Trim Range | ± 200Hz. |
Remote Variable Speed Range | 500 -7.5Hz. or any part thereof |
Terminal Sensitivity | J: 100Hz., ± 15Hz/Volt @ 5.0 K Impedance |
L: 735Hz., ± 60Hz/Volt @ 65 K Impedance | |
N: 148Hz., ± 10Hz/Volt @ 1Meg. Impedance | |
P: 10V DC Supply @ 20ma Max. | |
Speed Switch Adjustment Range | 1000-10000Hz. |
Environmental | |
Ambient Operating Temperature Range | -40°c to +85°c |
Relative Humidity | up to 95% |
Storage Temperature | -55°c ~ 90°c |
Shock | 20-100HZ 500mm/Sec. |
Input Power | |
Supply | 12 or 24V DC Battery Systems(Transient and Reverse Voltage Protected) |
Polarity | Negative Ground(Case Isolated) |
Power Consumption | 50mA continuous plus actuator current |
Actuator Current Range @ 25°c-(Inductive Load) | Min. 2.5 Amps, Max. 10 Amps continuous |
Speed Sensor Signal | 0.5-120 V RMS |
Speed Switch Relay Contacts(N.O.and N.C.) | 10Amp |
Package Included:
1 x Speed Controller
1 x English Instructions
