Product Code: 7493297
Availability: In Stock
Ex Tax: $22.99

Product Description

Description :

WTR10-E Digital RS485 Modbus Output Temperature Humidity Transmitter Sensor High Precision Measurement Analysis Instruments

WTR10-E temperature and humidity transmitter adopts imported digital sensor from Switzerland, with reliable performance, high precision, small annual drift and fast response speed. RS485 bus technology, based on industrial MODBUS-RTU protocol, realizes low-temperature and humidity status online monitoring. Practical integrated sensor. 

ItemWTR10-E RS485 Digital Modbus Output Temperature Humidity Transmitter Sensor 
Shell materialABS material
Power supply rangeDC8V~48V (no positive and negative polarity can be reversed)
Measuring rangeTemperature: -40 ° C ~ 125 ° C;
Humidity: 0 ~ 100% RH
Measurement accuracyTemperature: ± 0.3 ° C, resolution: 0.1 ° C
Humidity: ± 3.0% RH, resolution: 0.1 RH
Response time2s
Communication output interfaceRS485
Baud rate1200, 2400, 4800, 9600 self-setting (dial switch), the default 9600 
Byte format8 data bits, 1 stop bit, no need to check
Communication protocolModbus-Rtu
The communication address can be set1-63 (6-digit dial switch) the default 1
Installation methodrail installation
Shell size65 x 46 x 28.5mm / 2.56" x 1.81" x 1.12"
1. Switzerland Sensirion high-precision digital temperature and humidity sensor (SHT20), high sensitivity, good stability, full temperature automatic compensation. 
2. MCU uses ST's professional leading high-quality low-power chips to ensure processing power and stability. 
3. Standard RS485 output, can achieve long-distance communication. 
4. Various standards for the MOdbus-RTU communication protocol are used in the industrial field. 
Product Installation Method
WTR10-E is a high-precision temperature and humidity transmitter with beautiful appearance and small size. It is designed with standard rail structure and is easy to install. It can also be installed indoors or suspended ceiling. 

Product Instructions: 

1. This product is not suitable for long-term condensation and chemical pollution environment, to prevent chemical agents, oil, dust and other direct damage to the sensor. Remember not to carry out cold and thermal shocks. 
2. Check carefully before use to ensure correct wiring. The positive and negative poles of the power supply can be reversed. The power supply of this product is not divided into positive and negative poles. The communication line needs to be connected correctly according to RS485A and RS485B, otherwise it will not be able to communicate. 
3. Temperature and humidity measurements are not accurate when heat transfer and temperature differences between the test area and the test area are avoided. 
4.Installed in a stable environment, avoid direct lighting, away from windows and air conditioning, heating and other equipment, avoid direct to the window, door. 
5. Try to avoid high-power interference equipment, so as not to measure inaccurate, such as inverters, motors, etc. 
6. If you want to disassemble the product, you must first disconnect the power supply before disassembling. 
7. This transmitter is indoor type to prevent water from entering inside the transmitter to avoid damage. 
8. One year from the date of purchase, and the product is a lifetime service, after the warranty period we bear the cost of maintenance. 
9. If you encounter some problems during use, please do not disassemble and repair the product, please contact our customer service staff to solve some problems you encounter under the guidance of the engineer. 
Package Includes:  

1 x WTR10-E Temperature Humidity Transmitter Sensor 

Write a review

Note: HTML is not translated!